Shenzhen Sunyuan Technology Co., Ltd.  

Product Name: 4-20mA to RJ45 Ethernet a-D Converter with Modbus TCP or Modbus RTU Model NO.: SYADxx-U/A-RJ45 Input: 0-5V, 0-10V, 0-75mv, 4-20mA, 0-20mA, etc Output: RJ45, RS232, RS485 Power Supply: 8-50VDC Amount of Channel: 2-Channel to 8-Channel, Customized Communication Protocol: Modbus RTU, Modbus TCP, Ascii Measuring Accuracy: Better Than 0.05% Programmable: Yes Isolation: 3kv Among Input, Output and Power Supply Non-Isolation: Non-Isolation From Channel to Channel Installation: 35mm Rail-Mounted Type Trademark: SUNYUANSZ Transport Package: Foam Bag + Carton Box Specification: ISO9001: 2008, CE, ROHS Origin: Shenzhen Product Description 4-20mA/0-5V/0-75mV to RJ45 Ethernet A-D Converter with Modbus TCP/Modbus RTUSYADxx Ux/Ax-RJ45 Series4-20mA/0-5V to RJ45 Ehternet A-D Converter Features>> Directly convert 4-20mA and other analog data into communication digital data for Ethernet and Can bus.>> Support 10M Ethernet RJ45 interface, support Modbus TCP communication protocol.>> Support RS 485/RS 232 serial ports extended, support Modbus RTU protocol.>> Measuring precision is more than 0.05%, do calibration on the precision of modules by computer is available.>> 8-channel analog input with common ground, 3000VDC isolation between I/O terminal and the system.>> Wide range auxiliary power supply wide range: 8 - 50VDC>> Unique external form, high reliability, programmable, DIN Rail 35 standard installation.>> User can program to set address, baud rate, etc for the modules.4-20mA/0-5V to RJ45 Ehternet A-D ConverterApplications>>Monitoring, measuring and remotely controlling the industrial field through local area network.>>Applied in the industrial intelligent system for Ethernet, RS232/485 can bus>>Gathering 0-10V/4-20mA signal and converting into Ethernet RJ45 output.>>Sensor signal A/D conversion, network control and long distance transmission.>>Ethernet multi-channel analog data acquisition, monitoring and long distance transmission.>>Meters and instruments data acquisition and recording.>>Monitoring operating data from electric equipment, transportation and other equipment system. >>Achieve the network operation in Environment protection equipment, security, medical equipment and other equipment.4-20mA/0-5V to RJ45 Ehternet A-D ConverterGeneral ParametersTypical @ +25ºC,Vs:24VDC)Input type:Current Input/ Voltage InputPrecision:0.05%Input offset:±0.1 uA/ºCTemperature Drift:±15 ppm/ºC (±30 ppm/ºC,Max )Input Impedance:50Ω (4-20mA/0-20mA/0-±20mA current input )100Ω (0-10mA/0-±10mA current input )1KΩ (0-1mA/0-±1mA current input )More than 1MΩ(voltage input)Bandwidth:-3 dB 10 HzConversion Rate:10 SpsCMR:120 dB(1kΩ Source Imbalance @50/60 Hz)NMR:60 dB (1kΩ Source Imbalance @50/60 Hz)Input Terminal Protection:Over-voltage protection, over-current protectionCommunication:Serial Port:Support standard Modbus RTU protocol and special ASCII character communication protocol, RS232/RS485 interface.Baud Rate:(300 bps,600 bps,1200 bps,2400 bps,4800 bps,9600 bps,19200 bps,38400bps) ,can be set through software).Address (0x00~0xFF) can be set through softwareEthernet:Support standard Modbus TCP protocol, RJ4 network interface.IP address and terminal number can be set through software.Communication Response Time:100 ms Max.Operating Power Supply:+8 -50 VDC wide power supply range, with internal anti-inverse connection and over-voltageProtection circuit.Power Consumption:Less than 2WOperating Temp.:- 45 -+80ºCOperating Humidity:10 -90% (no condensation)Storage Temp.:- 55 -+85ºCStorage Humidity:10 -95% (no condensation )Isolation Withstand Voltage :3KVDC between input and output every minute, stray current 1mA, output and power areCommon-ground.Endure Impact Volt:3KVAC, 1.2/50us (peak value)Dimension:123 x70x 30mm4-20mA/0-5V to RJ45 Ehternet A-D Converter Model Selection:4-20mA/0-5V to RJ45 Ehternet A-D Converter Terminal Defintion:Note: Copyright Reserved by Sunyuan Technology. For detailed information, please enquire us for data sheet.For more information, please feel free to contact us: